Keypad Features and Operation
Digital Life User Manual | Page 10 of 62 ATT-UM-V1.1-201303
Arming the System-AWAY
Press the AWAY button to arm all of the sensors, including perimeter and interior
sensors. The system generates an exit delay timer interval. The keypad beeps
and the LCD displays “Arming - Exit Now.” Initially the keypad beeps slowly
during the exit delay timer interval and then chirps fast for the last ten (10)
seconds.
You should exit through the designated entry/exit door(s) before the exit delay
timer interval expires. You may disarm the system during the exit delay timer
interval by entering your four (4) digit Alarm Panel PIN. After the exit delay timer
interval expires, the system is in the Armed—AWAY mode. The ARMED (Red)
LIGHT is illuminated and the LCD displays “Armed - AWAY”.
To Next Page
Loading...