CP-01-2010 Supported Features for False Alarm
Reduction
Digital Life User Manual | Page 51 of 62 ATT-UM-V1.1-201303
Digital Life
Feature
Name
CP-01
Feature
Name Settings
Default
Setting Feature Description
speaking with a Digital Life Customer
Care Technical Support agent or
access www.att.com/dlpin.
Disarm Disarm Basic
system
operation
You enter your four (4) digit Alarm
Panel PIN into a keypad to disarm
the system. You must create your
Alarm Panel PIN by speaking with a
Digital Life Customer Care Technical
Support agent or accessing
www.att.com.dlpin.
System Test
Mode
System Test “System Under
Test” message
will periodically
appear in the
keypad LCD
Basic
system
operation
When system is in Test Mode, a
“System Under Test” message will
periodically appear in the keypad
LCD.
Automatic
Termination
of Test
Mode
Automatic
Termination
A test duration
interval must be
selected ranging
from four (4)
minutes to
twenty-four (24)
hours when
entering Test
Mode.
Automatic
operation
When the system is placed in Test
Mode, a test duration interval must
be selected ranging from four (4)
minutes to twenty-four (24) hours.
While the system is in Test Mode,
the keypad LCD will periodically
display “System Under Test” and the
keypad will chirp once a minute.
During the last five (5) minutes of the
test duration interval the keypad will
chirp once very four (4) seconds. If
the system is not taken out of Test
Mode when testing is completed,
then the system will automatically
return to the normal mode of
operation after the test duration
interval has expired.
NOTE: In accordance with UL 681 Section 19, the total exit time cannot exceed 120 seconds as
per UL1023 Section 26.14.
To Next Page
Loading...
Need help?
General
