Testing Your System
Digital Life User Manual | Page 58 of 62 ATT-UM-V1.1-201303
Device Procedure Results Notes
Keypad
(Auxiliary
Emergency)
(SW-ATT-
PAD2W, SW-
ATT-SRN)
• DLS in Test Mode
• Press the AUXILIARY
button on the keypad
• When prompted, press
the asterisk (*) key to
confirm the Auxiliary
Emergency
• After alarms have been
observed, enter your
Alarm Panel PIN to
cancel the alarms and
then enter your Alarm
Panel PIN again to
clear the messages
• Keypad LCD will display:
Press * to Confirm AUX
• Keypad LCD will display:
AUX Emergency Sent
• Keypad LCD will
Display:
Alarm – Enter PIN to
Cancel
• An Auxiliary
Emergency alarm
has been sent to
AT&T Digital Life
Central
Monitoring Center
with no action
required
Keypad and
Siren
(Police
Emergency)
(SW-ATT-
PAD2W, SW-
ATT-SRN)
• DLS in Test Mode
• Press the POLICE
button
• When prompted, press
the asterisk (*) key to
confirm the police
Emergency
• After alarms have been
observed, enter your
Alarm Panel PIN to
cancel the alarms and
then enter you Alarm
Panel PIN again to clear
the messages
• Keypad LCD will display:
Press * to Confirm
POLICE
• Siren and keypad will
sound an Intrusion
Alarm: Slow one (1)
second short beeping
• Keypad LCD will display:
POLICE Emergency
Sent
• Keypad LCD will
Display: Alarm – Enter
PIN to Cancel
• A Police
Emergency alarm
has been sent to
AT&T Digital Life
Central Monitoring
Center with no
action required