13
Local Area Codes
1 Press o.
2 Press C or c.
3 Use the softkey to select CALL ID
.
4 Select OK
until the screen displays Local Area Code.
5 Press C or c to change the first digit.
6 Select NEXT
to move to the second digit.
7 Press C or c to change the second digit.
8 Select NEXT
to move to the third digit.
9 Press C or c to change the third digit.
10 Select NEXT
to move to the next Local Area Code,and follow Steps 5 through 10
above.
11 Select OK
when you have finished programming Local Area Codes.
Blocked Call Information
NOTE: This feature may be called by different names by different local telephone
companies and may not be available in all areas.
You can set up the system so that when a call is received from a caller with a blocked
telephone number,the system will play a pre-recorded announcement (“We’re sorry,
blocked calls to this number cannot be accepted”), then hang up.
1 Press o.
2 Press C.
3 Use the softkey to select CALL ID
.
4 Select OK
until the screen displays Blocked Calls.
5 Select CHANGE
to display Accept or Do Not Accept.
6 Select OK
.
SET UP SYSTEM FEATURES
To Next Page
Loading...
