Remote Access Commands (continued)
Function Command:
Record memo Press * 8;then mailbox number where
you want memo recorded;speak after
beep;press # 5 to exit.
End remote access call Press * 0.
Turn system off Press # 0;the system announces,
“machine off.” Press # 0 again to turn
the system back on.
Turn system on When system is off,it answers after 10
rings and announces,“Please enter your
remote access code.” Press #,then enter
your remote access code.
NOTE: The remote access call automatically ends if you don’t press a
key within 20 seconds (other than when recording or playing messages
or announcements).
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
24
To Next Page
Loading...
