Option 1
Qwest’s Actiontec Q1000 modem/router is a high speed Fiber Optic DSL modem and router combination device and is usually
deployed in Colorado, Arizona, and some parts of the West coast. To resolve most home networking issues with the Actiontec
modem router and the 3G MicroCell, you will need to do two things:
1. Set up the modem in Transparent Bridge Mode
2. Use a new router to connect between the Qwest modem router and the 3G MicroCell
Step 1: Transparent Bridge Mode
Put the Q1000 in a Transparent Bridge Mode as follows:
1. Open a web browser and navigate to http://192.168.0.1
2. Select Quick Setup.
3. Scroll down and select Advanced IP Configuration.
4. Select RFC 1483 Transparent Bridging.
To Next Page
Loading...
