AT&T 9320/8220 User Manual

OPERATING RANGE
This cordless telephone operates within the maximum
power allowed by the Federal Communications Commission
(FCC). Even so,this handset and base can communicate
over only a certain distance — which can vary with the
locations of the base and handset,the weather,and the
construction of your home or office. For best performance,
keep the base antenna fully upright.
If you receive a call while you are out of range, the
handset might not ring — or if it does ring,the call might
not connect when you press P. Move closer to the
base,then press P to answer the call.
If you move out of range during a phone
conversation, you might hear noise or interference. To
improve reception,move closer to the base.
If you move out of range without pressing O,your
phone will be left “off the hook.” To hang up properly,walk
back into range,periodically pressing O.
900 MHz
Cordless Telephone 9320/8220
Fold open this manual for information about this
telephone’s installation and operation. Please
also read Part 1 — Important Product Information.
AT&T and the globe symbol are registered trademarks of AT&T Corp.licensed to Advanced American Telephones.
© 2001 Advanced American Telephones. All rights reserved.
Printed in China.
Issue 1AT&T 05/01
USER’S MANUAL
Part 2
REVISED
5/17/01

AT&T 9320/8220 Specifications

General

Brand	AT&T
Model	9320/8220
Category	Cordless Telephone
Language	English

Summary

Installation Guide

Pre-Installation Requirements

Table or Desk Installation

Provides step-by-step instructions for installing the telephone base on a table or desk.

Wall Mounting Installation

Details the process for mounting the telephone base on a wall.

Battery Management

Charging the Handset Battery

Explains how to charge the handset battery and indicators for charging status.

Replacing the Handset Battery

Guides users through the process of replacing the handset battery pack.

Telephone Memory Features

Storing Phone Numbers

Step-by-step guide to storing telephone numbers in memory.

Modifying Stored Numbers

Dialing Stored Numbers

Process for dialing numbers that have been stored in memory.

Troubleshooting Guide

Phone Not Working Issues

Checks and steps to resolve issues when the phone does not work at all.

Re-initializing Handset and Base

Procedure to re-initialize the handset and base to resolve operational issues.

Two-Beep Signal Troubleshooting

No Ringing on Incoming Calls

Noise or Interference Solutions

Solutions for experiencing noise or interference during phone calls.

Hearing Other Calls

Call Dropping After Channel Change

Special Services and Touch Tone