AT&T BL102-0 User Manual

12
Getting started
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT162342/BT262342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
Aer you install your telephone or power returns
following a power outage, the handset will
prompt you to set the date and time.
If you are installing the telephone for the rst
time, aer the date and time setting is done or
skipped, the telephone base will prompt if you
want to set Smart call blocker* and answering
system via voice guide. Follow the voice guide to
set or skip the settings.
f While the voice guide is playing, you can press
DELETE on the telephone base to stop.
f To restart the voice guide, press the keys on the telephone base
in the following sequence.
/SKIP — /SKIP — /SKIP — /REPEAT — /REPEAT
— /SKIP — /PLAY/STOP
Battery installation and charging
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Li out the old battery and
disconnect it from the handset. Follow
the instructions to install and charge a
new battery.
* Includes licenced Qaltel
TM
technology.
Qaltel
TM
is a trademark of Truecall Group Limited.
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
B
a
ttery Pack
/ Bl
oc-piles :
B
T183342/BT283342 (2.
4V 400mAh Ni-MH)
W
ARNING / AVERTISSEMENT
:
D
O NOT
BURN OR
PUNCTURE BATTERIES.
N
E PAS I
N
CINÉRER
OU PERCER LES PILES.
Made i
n China / Fabri
qué
en
chine
CR
1535
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO

AT&T BL102-0 Specifications

General

Brand	AT&T
Model	BL102-0
Category	Handsets
Language	English