Registration and deregistration
13
Before using a new BL102-0 handset, you must register it with the
telephone base rst. The telephone system can support up to ve
handsets.
The handsets provided with your telephone system are already
registered as HANDSET 1, and so forth. Additional handsets
registered to the telephone system are assigned in sequential
order they are registered (up to HANDSET 5).
You must register each handset separately. When rst purchased,
all expansion handsets show To register HS... and ... see manual
alternately.
Register a handset to your telephone base
1. Before you begin registration, make sure the handset is out of
the telephone base or charger and shows To register HS... and
... see manual.
2. Put the handset you wish to register on the telephone base cradle.
3. The handset shows Registering... and the IN USE light on the
telephone base turns on. If the registration is successful, the
handset screen displays Registered and beeps. The handset is
now registered with the telephone base.
For registration, put the handset on the
telephone base, not the handset charger.
Adding and registering handsets
To Next Page
Loading...
Need help?
General
