13
Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation Steps
Adding an entry in
the directory
1. MENU -> / -> Directory ->
SELECT.
2. SELECT to select Add new entry.
3. Enter a telephone number up to 30 digits ->
SELECT
.
4. Enter a name up to 15 characters ->
SELECT
.
Searching/dialing an
entry
1. Press pDIR on the handset in idle mode -> / to
select the desired directory.
2. Press PHONE/FLASH or /SPEAKER to call.
Caller ID
This product supports caller ID services oered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Caller ID announce
When this feature is on and you have an incoming call, the handset and/or base speaks
“Call from...” and the name of the caller based on the directory or caller ID information. If
the caller’s name is private or unknown, the phone number up to the last 11 digits will be
spoken. If the caller’s phone number is also private or unknown, no information will be
spoken.
Using a cordless handset:
1. MENU -> / -> Caller ID annc -> SELECT.
2. / to choose On or O -> SELECT.
Review and dial a number in the call log
1. Press CID on the handset or telephone base in idle mode -> / to scroll
through the list.
2. Press
PHONE/FLASH or /SPEAKER on the handset to dial.
Erase missed calls indicator in the call log
When the screen shows XX Missed calls, scroll the call log one by one, or press and
hold OFF/CANCEL on the handset in idle mode.
To Next Page
Loading...
