Getting started
11
Step 2
Align the cover at against the battery compartment, then slide it
upwards until it clicks into place.
Step 3
Charge the handset by
placing it face forward
in the telephone base or
charger. The CHARGE
light on the handset is on
during charging.
IMPORTANT INFORMATION
f Use only the supplied rechargeable battery or replacement
battery (model BT162342/BT262342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268. For more detailed
instructions, refer to the online Complete user’s manual at
www.telephones.att.com/manuals.
f If you do not use the handset for a long time, disconnect and
remove the battery to prevent possible leakage
.
Battery installation and charging
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Batter
y Pack
/ Bloc-pi
les
:
BT183342/BT283342 (2.4V
400mAh Ni-MH)
WARNING /
AVERTISS
EM
ENT
:
DO NOT BURN
OR PUNC
TURE BATTER
I
ES.
NE PAS INC
I
NÉRER OU PERC
ER LES PILES.
Made in China /
Fabr
i
qué en chine
CR1535
To Next Page
Loading...
