21
Telephone settings
Telephone settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to make a
local call (area code plus telephone number), you need to delete your home area code and dial
out locally from the call ID log. With the home area code displayed, press and hold
MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area
code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary)
service, you must change the dial mode to pulse dialing before
using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Use qCID or pDIR to scroll to Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to scroll to Touch-tone or Pulse, then press
MENU/SELECT.
To Next Page
Loading...
Need help?
General
