Telephone settings
18
Telephone settings
LCD language
You can select the language used for all screen displays.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press MENU/SELECT to choose LCD language.
4. Press qCID or pDIR to highlight English, Français
or Español, then press MENU/SELECT to conrm.
NOTE: If you accidentally change the LCD language to French or Spanish, you
can reset it back to English without going through the French or Spanish
menus. Press MENU/SELECT in idle mode, then enter *364#. There is a
confirmation tone.
Voice language
You can select the voice language (English or French) to be used for the voice
prompts in your answering system and caller ID announce.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press MENU/SELECT to choose Voice language.
4. Press qCID or pDIR to select English or Français.
5. Press MENU/SELECT to save your preference.
Caller ID announce
The caller ID announce feature lets you know who’s calling
without having to look at the display. When you have an
incoming call, the handset and/or base speaks “Call from...”
and the name of the caller based on the directory or caller
ID information. If the caller’s name is private or unknown,
the phone number up to the last 11 digits will be spoken.
If the caller’s phone number is also private or unknown,
no information will be spoken. By default, the caller ID
announce feature is programmed On.
To turn on/o the caller ID announce on your handset
or base:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Caller ID annc, then
press MENU/SELECT.
3. Use qCID or pDIR to select On or Off, then press
MENU/SELECT.
Telephone settings
LCD language
ECO
English
ECO
Caller ID annc
ECO
On
ECO
Voice language
ECO
To Next Page
Loading...
Need help?
General
