10
Registration and deregistration
Before using a new CL80107 or CL80117 handset, you must register
it with the telephone base rst. The telephone system can support
up to 12 handsets.
For CL80107 (black) handset, make sure it is registered to CL82107/
CL82207/CL82307/CL82407/CL82507/CL83107/CL83207/CL83307/
CL83407/CL84107/CL84207/CL84257/CL84307/CL84357 telephone.
For CL80117(white) handset, make sure it is registered to CL82357
telephone.
The handsets provided with your telephone system are already
registered as HANDSET 1, and so forth. Additional handsets
registered to the telephone system are assigned in sequential
order they are registered (up to HANDSET 12).
You must register each handset separately. When rst purchased, all
expansion handsets show To register HS, see manual.
Register a handset to your telephone base for AT&T models
CL82107/CL82207/CL82307/CL82357/CL82407/CL82507/CL83107/
CL83207/CL83307/CL83407
1. Before you begin registration, make sure the handset is out of
the telephone base or charger and shows To register HS,
see manual.
2. Put the handset you wish to register on the telephone
base cradle.
For registration, put the handset on the
telephone base, not the handset charger.
Adding and registering handsets
To Next Page
Loading...
Need help?
General
