20
Appendix A
If the telephone does not seem to be
responding normally, try putting the cordless
handset in the telephone base or charger. If it
does not seem to respond, do the following (in
the order listed):
Disconnect the power to the telephone base.
Disconnect the cordless handset battery, and
spare battery, if applicable.
Wait a few minutes.
Connect power to the telephone base.
Re-install the battery, and place the cordless
handset into the telephone base.
Wait for the cordless handset to re-establish
its connection with the telephone base.
Allow up to one minute for this to take
place.
•
•
•
•
•
•
Troubleshooting
Common cure
for electronic
equipment.
System does not
receive caller ID
when on a call.
Make sure you subscribe to caller ID
with call waiting features from your local
telephone company. Caller ID features
works only if both you and the caller are
in areas offering caller ID service, and if
both telephone companies use compatible
equipment.
•
To Next Page
Loading...
Need help?
General
