Telephone settings
12
Handset settings
Set date/time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. You can turn off the date and time
settings of the caller ID service and set the date and time manually (see Use
caller ID to automatically set date and time on page 16).
After a power failure or handset registration, the system reminds you to set the
date and time.
Follow the steps mentioned below to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press qCID or pDIR to scroll to >Set date/time and then
press MENU/SELECT.
3. Press qCID or pDIR to select the month, then press
MENU/SELECT, or enter the number using the dialing keys.
4. Press qCID or pDIR to select the day, then press
MENU/SELECT, or enter the number using the dialing keys.
5. Press qCID or pDIR to select the year, then press
MENU/SELECT, or enter the number using the dialing keys,
then press MENU/SELECT to move on to set the time.
6. Press qCID or pDIR to select the hour, then press
MENU/SELECT, or enter the number using the dialing keys.
7. Press qCID or pDIR to select the minute, then press
MENU/SELECT, or enter the number using the dialing keys.
8. Press qCID or pDIR to highlight AM or PM, or press 2 for AM or 7 for PM.
Then, press MENU/SELECT to confirm. There is a confirmation tone and the
screen returns to the previous menu.
SET DATE
MM/DD/YY
p
q
SET TIME
HH:MM --
p
q
Ringers
>Set date/time
p
q
To Next Page
Loading...
Need help?
General
