Directory
36
Speed dial
The telephone system has 10 speed dial locations (2-9 and 0,
location 1 is reserved for voicemail) where you can store
the telephone numbers you wish to dial more quickly. You can
store up to 30 digits in each location. Speed dial assignments
can only be selected from the existing directory entries, with
the exception of 1, which must be manually entered. In the
directory, speed dial locations except for 1 are indicated by
their number in the bottom right hand corner of the entry.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press MENU/SELECT to select >Directory.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial
location (2-9, 0), then press MENU/SELECT. The screen
briefly shows Copy from Directory..., then enters your
directory list.
5. Press qCID or pDIR to scroll to the phone number you wish
to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
Reassign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press MENU/SELECT to select >Directory.
3. Press qCID or pDIR to scroll to >Speed dial. Press
MENU/SELECT.
4. Press qCID or pDIR to choose the location you wish to reassign,
(2-9, 0), then press MENU/SELECT to show the directory entry.
5. Press MENU/SELECT again.
6. Scroll to >Change SD and then press MENU/SELECT. The screen
briefly shows Copy from Directory..., then enters your directory list.
7. Press qCID or pDIR to scroll to the phone number you wish
to reassign to the selected speed dial location.
8. Press MENU/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Add contact
>Speed dial
p
q
>2:Robert Brown
3:<empty>
p
q
Copy from
Directory...
Robert Brown
888-883-2445
p
q
2
Linda Miller
888-722-7702
p
q
2
Robert Brown
888-883-2445
p
q
2
Speed dial location
To Next Page
Loading...
Need help?
General
