2
Getting started
Quick reference guide - handset & telephone base
PUSH TO TAL�
Press to initiate a one-to-one (page 15) or
one-to-group broadcast (page 16).
Press and hold to broadcast to a group of
handsets (page 16).
IN USE indicator
On when the handset is in use, or when
the answering system is answering an
incoming call.
On when a handset is being registered.
Flashes when there is an incoming
call or when a handset is being
deregistered.
Flashes when another telephone is in
use on the same line.
Message counter
Shows the number of messages or other
answering system information.
/PLAY/STOP
Press to start or stop
message playback
(page 28).
/S�IP
Press to skip a message
(page 28).
/REPEAT
Press to repeat a message.
Press twice to play the
previous message (page 28).
X/DELETE
Press to delete the message
currently playing (page 28).
Press twice to delete all old
messages when the phone is not
in use (page 29).
/ANSWER ON
Press to turn the built-in
answering system on or off
(page 23).
q/VOL/p
During message
playback, press to
adjust the listening
volume (page 28).
While in idle mode,
press to adjust the
base ringer volume.
/HANDSET LOCATOR
While the phone is idle, press
to page all handsets (page 11).
Handset
side view
Telephone base
To Next Page
Loading...
