AT&T CL82301 - Intercom

Telephone operation
20
Handset operation
Speakerphone
During a call, press /SPEA�ERSPEA�ER to switch between handsfree
speakerphone and normal handset use. Press OFF/CANCEL
to hang up.
NOTES:
When you use the speakerphone, the key pad of the handset and the
/SPEA�ER button are lit.
The speakerphone uses more power than the normal handset. If the handset battery becomes
very low while you are using the speakerphone, the call remains in speakerphone mode until you
hang up or the battery becomes depleted.
After installing a battery into the handset, the screen may show Low battery. If you use the
speakerphone at this time, the battery may become depleted. Follow the instructions in the
Battery installation and charging section on pages 6-7.
Last number redial
Each handset stores the last 10 telephone numbers dialed (up to 30 digits).
To view the 10 most recently dialed numbers:
To display the most recently called number, press REDIAL/PAUSE.
To view up to 10 recently called numbers, press REDIAL/PAUSE then qCID
or pDIR, or press REDIAL/PAUSE repeatedly.
The handset beeps twice at the end of the list. Press OFF/CANCEL to exit.
To redial a number:
To dial the displayed number, press PHONE/FLASH or
/SPEA�ERSPEA�ER.
-OR-
Press PHONE/FLASH or /SPEA�ERSPEA�ER, then press
REDIAL/PAUSE repeatedly to view the redial memory. Press MENU/SELECT
to dial the displayed number.
To delete a number:
While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
•
•
•
•
•
•
•
•
Redial #1/10
888-883-2445
p
q
10/15
10:01
AM
Speaker 0:00:30
Elapsed time