AT&T CL82314 - Default Chapter; Parts Checklist

Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Telephone line cord
Power adapter for
telephone base
Abridged
User’s manual
Abridged user’s manual
CL82114/CL82214/CL82314/
CL82364/CL82414/CL82464/
CL82514
DECT 6.0 cordless telephone/
answering system with
caller ID/call waiting
Quick start guide
Wall mount bracket
Telephone base
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles : BT183342/BT283342 (2.4V 400mAh Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine CR1349
A
A
B
B
Cordless handset
(1 for CL82114)
(2 for CL82214)
(3 for CL82314/CL82364)
(4 for CL82414/CL82464)
(5 for CL82514)
Charger for cordless handset
with power adapter installed
(1 for CL82214)
(2 for CL82314/CL82364)
(3 for CL82414/CL82464)
(4 for CL82514)
Battery for cordless handset
(1 for CL82114)
(2 for CL82214)
(3 for CL82314/CL82364)
(4 for CL82414/CL82464)
(5 for CL82514)
Battery compartment cover
(1 for CL82114)
(2 for CL82214)
(3 for CL82314/CL82364)
(4 for CL82414/CL82464)
(5 for CL82514)
Caution: Use only the power adapter provided with this product. To obtain a replacement,
visit our website at www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
Telephone base installation
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user’s
manual provided in the package, or see the online Complete
user’s manual at www.telephones.att.com/manuals.
Quick start guide
CL82114/CL82214/CL82314/CL82364/CL82414/
CL82464/CL82514
Raise the antenna.
Plug the small end of the
telephone base power
adapter into the power
adapter jack on the back of
the telephone base.
Route the power
adapter cord
through this slot.
Plug the large
end of the power
adapter into a
power outlet not
controlled by a wall
switch.
Plug one end of the
telephone line cord
into a telephone
jack or a DSL filter.
If you have DSL
high-speed Internet
service, a DSL filter (not
included) is required.
Route the
telephone line
cord through
this slot.
Charger installation
Plug the power
adapter into a
power outlet not
controlled by a wall
switch.
Plug the other end
of the telephone
line cord into the
telephone jack on
the back of the
telephone base.