AT&T CL82465 - Install

5
Install
Telephone base
Charger
Caution: Use only the power adapter(s) provided with this product. To obtain a
replacement, visit our website at
https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Plug the other
end of the
telephone line
cord into the
telephone jack
on the back of
the telephone
base.
Route the power
adapter cord through
this slot.
Plug the small end of
the telephone base
power adapter into
the power adapter
jack on the back of the
telephone base.
Plug the large end of the
telephone base power
adapter into a power
outlet not controlled by
a wall switch.
Plug one end of the
telephone line cord into
a telephone jack or a
DSL lter.
If you have DSL high-speed
Internet service, a DSL lter
(not included) is required.
Route the telephone line
cord through this slot.
Plug the power adapter into a power
outlet not controlled by a wall switch.