Telephone operation
34
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in
the directory, caller ID log or redial memory while you are on a call.
Chain dialing is useful when you wish to access other numbers
(such as bank account numbers or access codes) from the
directory, caller ID log or redial list.
To access the directory while on a call:
1. Press MENU/
SELECT.
2. Press CID or DIR to scroll to Directory and
then press
MENU/SELECT.
3. Press CID or DIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the caller ID log while on a call:
1. Press MENU/
SELECT.
2. Press CID or DIR to scroll to Caller ID log,
then press MENU/SELECT.
3. Press CID or DIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/
PAUSE to show the most recently
dialed number.
2. Press
CID or DIR to scroll to the desired
number, or press REDIAL/PAUSE repeatedly to
find the desired number. Press. Press MENU/SELECT to dial the number
shown.
NOTES:
You cannot edit a directory entry while on a call. For more details about the direc-
tory, see pages 38-47.
You cannot copy a caller ID entry into the directory while on a call. For more details
about the caller ID log, see pages 48-54.
If you press REDIAL/
PAUSE while on a call, you can only view the ten most recently
dialed numbers but you cannot erase the entries. For more details about the redial
memory, see page 23.
Press
OFF/CANCEL on the handset to exit redial, directory or caller ID log when
on a call.
•
•
•
•
REDIAL #1/10
800-360-4121
Phone 0:01:20
Charlie Johnson
6:30
AM
8/06
888-883-2445
Charlie Johnson
>Directory
Answering sys
To Next Page
Loading...
