AT&T CL83213 User Manual

31
Telephone settings
Telephone base settings
Rename base
You can edit the name for the telephone base.
1. When the telephone is idle, press MENU/SELECT.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Rename base, then
press MENU/SELECT.
4. Change the telephone base name when prompted.
Press qCID or pDIR to move the cursor to the left
or right.
Use the dialing keys to enter a name (up to 11 characters). Each time
you press a key, a character on that key appears. Additional key presses
produce other characters on that key. See the chart on page 60.
Press X/DELETE to backspace and delete a character.
Press and hold X/DELETE to delete all characters.
5. Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
Key tone
The telephone base is set to beep with each key press. You can adjust the
key tone volume or turn it off. If you turn off the key tone, there are no
beeps when you press keys.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Key tone, then press
MENU/SELECT.
4. Use qCID or pDIR to select the desired volume
or Off.
5. Press MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
•
•
•
•
Rename base
> Key tone
p
q
KEY TONE
p
q
Clr voicemail
> Rename base
p
q
RENAME BASE
BASE_______

AT&T CL83213 Specifications

General

Brand	AT&T
Model	CL83213
Category	IP Phone
Language	English