Telephone operation
44
Options while on calls
To transfer an outside call from the telephone base:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose Transfer.
If your have one handset, the outside call is put on
hold and the telephone base shows
Transferring call... The handset rings and shows
Transfer from BASE 0 (BASE represents the
base name).
If you have more than one handset, the telephone
base shows TRANSFER TO: Use the dialing keys to
enter a specific handset number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets
10-12, or TONE followed by
#
for all handsets),
or press qCID or pDIR to scroll to the desired
handset and press MENU/SELECT. The outside call is put on hold and
the telephone base shows Transferring call... or Transferring call to
all... The other handset(s) rings and shows Transfer from BASE 0 (BASE
represents the base name).
3. To answer the call on the destination handset, press, press PHONE/FLASH or
/SPEAKERSPEAKER. The telephone base shows Call transferred and goes to
idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is answered,
press OFF/CANCEL, PHONE/FLASH or /SPEAKERSPEAKER on your handset, or CANCEL or
/SPEAKERSPEAKER on your telephone base.
If the other device does not answer the transfer within 30 seconds, the transfer ends and the
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
•
•
•
•
>Tr a nsf e r
Int e rco m
p
q
Speaker 0:00:12
6:30
AM
8/06
TRANSFER TO:
> H an d s e t 2
p
q
To Next Page
Loading...
Need help?
General
