Multiple handset use
Intercom
Using the telephone base:
1. When the telephone base is not in use, press INT. You
can also press MENU/SELECT in idle mode to enter the
main menu. Press qCID or pDIR to scroll to Intercom,
then press MENU/SELECT.
If you have one handset and no other registered
devices, the telephone base shows
Calling HANDSET X.
If you have cordless headset(s)/speakerphone(s) or
more than one handset, the telephone base shows
INTERCOM TO: Use the dialing keys to eenter a
specific handset number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets 10-12, #
for a single headset/speakerphone, # followed by
1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for
all devices), or presspress qCID or pDIR to scroll to the desired handset and
press MENU/SELECT. The telephone base shows Calling HANDSET X or
Calling all handsets.
The destination device(s) rings and shows Base 0 is calling or
BASE 0 is calling all.
2. To answer the intercom call, press
PHONE/FLASH, /SPEAKERSPEAKER or any
dialing key (0-9, TONE , or
#
) on the destination handset. Both the base
and the handset now show Intercom.
3. To end the intercom call, one party presses
OFF/CANCEL, or places the
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display
Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing
OFF/CANCEL on the
handset or CANCEL on the telephone base..
If the called device is not answered within 100 seconds, or if it is accessing the directory, caller ID
log, on a call or out of range, the initiating device shows No answer. Try again.
To temporarily silence the intercom ringer, press
OFF/CANCEL or MUTE/DELETE on the
handset, or press CANCEL or MUTE on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to
answer and end an intercom call.
If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone base,
they appear as HEADSET 1 and HEADSET 2, respectively, in the intercom menu.
•
•
•
•
•
•
•
•
Calling
HANDSET X
Intercom
Base 0
is calling
48
To Next Page
Loading...
Need help?
General
