Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single
handset. When the telephone base is not in use:
If you have one handset, press and hold PTT.
If you have more than one handset:
w Press PTT, then use the dialing keys to enter the
destination handset number.
-OR-
w Press qCID or pDIR to highlight the destination
handset number, then press MENU/SELECT or PTT.
The telephone base shows Connecting to HANDSET X...
(HANDSET represents the handset name, X represents
the destination handset number)
for a few seconds. When the connection is
made, both the telephone base and destination handset display Press and
hold [PTT] to talk.
2. Press and hold PTT. A chirp indicates your microphone
is on. Speak towards the telephone base. Your voice is
broadcast to the destination handset.
While you are speaking, the telephone base shows
PTT To handset: X.
3. Release PTT after speaking. Both devices beep once again and the screens
show Press and hold [PTT] to talk, then you can press and hold PTT to
continue speaking or the destination device can respond (see Answer a
PTT call on page 56).
4. To end the PTT call, press CANCEL. The telephone base shows
Push to talk Ended for a few seconds.
•
•
PTT To
handset: X
PUSH TO TALK
>HANDSET X
p
q
Connecting to
HANDSET X...
Press and hold
[PTT] to talk
53
To Next Page
Loading...
