Answering system
Answering system settings
To delete or reset your outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. PressPress MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Play annc, then press MENU/SELECT.
5. While the announcement is playing, press MUTE/DELETE to delete the
announcement. The system announces “Announcement deleted” and the
screen shows Annc. Deleted.
-OR-
1. When the handset is in idle mode, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. PressPress MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset to default annc?.
5. PressPress MENU/SELECT again. The screen shows Annc. reset to default.
Using the telephone base:
1. When the telephone base is in idle mode, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. PressPress MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Play annc, then press MENU/SELECT
5. While the announcement is playing, press X/DELETE to delete the
announcement. The system announces “Announcement deleted” and the
screen shows Annc. Deleted.
When your announcement is deleted, the system answers calls with the
default announcement described on page 81. You cannot delete the default
announcement.
-OR-
1. When the telephone base is in idle mode, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. PressPress MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset to default annc?.
5. PressPress MENU/SELECT again. The screen shows Annc. reset to default.
83
To Next Page
Loading...
Need help?
General
