60
Answering system
Base message counter displays
The base message counter shows the total number of answering system
messages. See the table below for other message counter displays.
Message counter displays
0
No messages.
0 (flashing)
You need to set the clock (pages 16 & 25).
1-99
Total number of old messages and memos, or message
number currently playing during old message playback.
1-99 (flashing)
Total number of messages and memos. The number
flashes when there are new (unreviewed) messages.
After a power failure, the number in the message
counter flashes to indicate that you need to set the
clock.
1-99 & F
(alternating)
Memory is full. You must delete some messages before
recording new messages.
- -
The system is answering a call on the telephone base,
or someone is trying to reach it remotely. The system is
in program mode.
1
BASE
10:01
AM
11/23
MSG#
Message
counter
To Next Page
Loading...
