11
Telephone base overview
IN USE indicator
On when the telephone is in use, or when the answering
system is answering an incoming call.
On when a handset is being registered.
Flashes when there is an incoming call or when all
handsets are being deregistered.
Flashes when another telephone is in use on the same line.
pDIR
Press to display the directory when the
telephone is not in use.
Press to scroll up while in menus and lists.
While entering names or numbers, press to
move the cursor to the right.
MENU/SELECT
When the telephone base is not in use,
press to show the menu.
While in the menu, press to conrm or
save an entry or setting.
REDIAL/PAUSE
Press repeatedly to view the last 10
numbers dialed.
While entering numbers, press and hold
to insert a dialing pause.
CANCEL
While in a menu, press to cancel an operation,
back up to the previous menu; or press and hold
to exit menu display completely.
When the telephone base is ringing, press to
mute the ringer temporarily.
When the telephone base is not in use, press and
hold to erase the missed call indicator.
qCID
Press to display the caller ID log when the
telephone is not in use.
Press to scroll down while in menus and lists.
While entering names or numbers, press to
move the cursor to the le.
/HANDSET LOCATOR
While the telephone is idle, press to page all
handsets.
Large tilt display
INT
Press to initiate an intercom conversation
or transfer a call.
VOL p/VOL q
During message playback or call
screening, press to adjust the listening
volume.
While in idle mode, press to adjust the
base ringer volume.
When on a call, press to adjust the
listening volume.
PTT/FLASH
Press to initiate a one-to-one or one-to-
group broadcast.
Press and hold to broadcast to a group of
system devices.
During a call, press to answer an
incoming call when you receive
a call waiting alert.
MIC
Microphone.
1
Press and hold to set or to
dial your voicemail number.
To Next Page
Loading...
Need help?
General
