Battery installation and charging
Getting started
7
Plug the battery
connector securely
into the socket
inside the handset
battery compartment,
matching the
orientation of the
engraved label.
1. Insert the supplied
battery with the
label THIS SIDE
UP facing up as
indicated.
2. Align the cover
flat against
the battery
compartment,
then slide it
upwards until it
clicks into place.
3.
Charge the handset by
placing it face up in the
telephone base or charger.
The CHARGE light is on
when charging.
4.
To replace the battery, press
the tab and slide the battery
compartment cover downwards.
Lift out the old battery and
disconnect it from the handset.
Follow the instructions above to
install and charge a new battery.
IMPORTANT / IMPORTANTE
THIS SIDE DOWN / CE CÔTÉ VERS LE BAS
Please charge the battery for a minimum of 16 hours prior to use.
Veuillez charger le bloc-piles pendant un minimum de 16 heures
avant l'utilisation.
Por favor cargue la pila por un minimo de 16 horas antes de
usares.
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
To Next Page
Loading...
Need help?
General
