AT&T CLP99387 - Answer a PTT Call

Multiple handset use
84
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
Using a cordless handset or the telephone base:
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
f PTT From HANDSET X To devices: X (the rst X represents the
initiating handset number, and the second X represents your handset
number; a maximum of four handset numbers appear).
-OR-
f PTT From BASE 0 To devices: X (the X represents your handset
number; a maximum of four handset numbers appear).
3. When your speakerphone light is o (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or
PTT/FLASH on your telephone base. You will hear a chirp. Speak towards
the device.
f While you are speaking, your device shows PTT To BASE 0 or PTT To
HANDSET X (X represents the destination handset number), or PTT
To devices: X (X represents the handset numbers of one or more
destination handsets; a maximum of four handset numbers appear).
f Your voice is broadcast to all destination devices.
Aer speaking, release PUSH TO TALK on your handset or PTT/ FLASH
on your telephone base. Your device will beep. Aer the beep, if your
speakerphone light is o, you can press and hold PUSH TO TALK on your
handset or PTT/FLASH on your telephone base to continue speaking, or the
destination device can respond.