EasyManua.ls Logo

AT&T CRL82312 - Directory; Speed dial

AT&T CRL82312
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Directory
34
Speed dial
The telephone system has 9 speed dial locations (2-9, 0) and
a voicemail access location 1 where you can store the
telephone numbers you wish to dial more quickly. You can
store up to 30 digits in each location. Speed dial assignments
can only be selected from the existing directory entries.
The voicemail access number must be manually entered.
In the directory, speed dial locations are indicated by their
number on the bottom left side of the screen.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial
location, or press the dialing key (2-9, 0) corresponding to
the location you wish to assign, then press MENU/SELECT.
The screen briefly shows Copy from Directory... then
enters your directory list.
5. Press qCID or pDIR to scroll to the phone number you
wish to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Reassign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENUMENU/SELECT.
4. Press qCID or pDIR to choose the location you wish to
reassign, or press the dialing key (2-9, 0) corresponding to
the location you wish to reassign, then press MENU/SELECT
to show the directory entry.
5. Press MENU/SELECT again.
6. Scroll to >Change SD and then press MENU/SELECT. The
screen briefly shows Copy from Directory... then enters
your directory list.
7. Press qCID or pDIR to scroll to the phone number you
wish to reassign to the selected speed dial location.
8. Press MENU/SELECT to save the setting and return to the
previous menu. There is a confirmation tone.
Speed dial location
Robert Brown
888-883-2445
2
Add contact
>Speed dial
>2:Robert Brown
3:<Unassigned>
Answering sys
>Directory
Copy from
Directory...
Robert Brown
888-883-2445
2

Table of Contents

Other manuals for AT&T CRL82312

Related product manuals