AT&T DAL75111 - Call Screening

108
Answering system
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard over the
telephone base when they are being recorded. If you turn call screening on, you
hear the incoming message.
To turn on or o the call screening feature:
1. Press MENU/SELECT in idle mode.
2. Press CID or to highlight Answering sys, then press
MENU/SELECT .
3. Press CID or to highlight Ans sys setup, then press
MENU/SELECT twice to select Call screening.
4. Press CID or to choose between On and O, then
press MENU/SELECT to save.
Note: For more information on call screening, see page 114.
Call screening
ECO
On
ECO