EasyManua.ls Logo

AT&T DAL75111 - Glossary of Terms

AT&T DAL75111
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become familiar with
using your Bluetooth devices and your new AT&T telephone system.
Active device slots - the Device list has two active slots for two cell phones, or
one cell phone and one headset. When a device in the list is active, it will have a
1: or 2: in front of the device name. In order to use a Bluetooth device on a call, it
must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELL line - the telephone line associated with your cell phone service. On your
DAL75111/DAL75121/DAL75211/DAL75221/DAL75311/DAL75321/DAL75411/
DAL75421/GL2113-1/GL2113-2/GL2113-3/GL2113-4/GL2113-11/GL2113-21/
GL2113-31/GL2113-41 handset, press CELL to use the cell line.
Connected - when you pair a Bluetooth device to the DAL75111/DAL75121/
DAL75211/DAL75221/DAL75311/DAL75321/DAL75411/DAL75421/GL2113-1/
GL2113-2/GL2113-3/GL2113-4/GL2113-11/GL2113-21/GL2113-31/GL2113-41,
it is placed in an active slot and automatically connected. When a device is
connected, a 1 and/or 2 will display aer on the handset screen. Also, the
CELL 1 and/or CELL 2 light on the telephone base will be on. If a device loses its
connection to the telephone base, it must be reconnected before you can use
the device with the telephone system.
Disconnected - when device(s) is/are disconnected,
1
and/or
2
is/are
not displayed on the handset screen. The CELL 1 and/or CELL 2 light on the
telephone base is/are o.
Device list - The list of devices that have been paired to the telephone. You can
pair up to 2 Bluetooth enabled devices (cell phones or headset).
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base is
in this mode. When pairing a headset, the headset must be set to this mode.
Depending on the manufacturer, this mode is sometimes referred to as Find Me
or Visibility.
HOME line - your conventional telephone land line. On your DAL75111/
DAL75121/DAL75211/DAL75221/DAL75311/DAL75321/DAL75411/DAL75421/
GL2113-1/GL2113-2/GL2113-3/GL2113-4/GL2113-11/GL2113-21/GL2113-31/
GL2113-41, press HOME/FLASH on the handset to use the home line.
Paired devices - Bluetooth enabled devices (cell phone or headset) that
have shared registration information with the telephone base. A total of two
Bluetooth enabled devices can be paired to the telephone base. However, only
one paired device can communicate with the base at a time.

Table of Contents

Other manuals for AT&T DAL75111

Related product manuals