51
Telephone operation
Handset locator
This feature helps you ndamisplacedhandset.
To start paging:
f Press FIND HS on the telephone base when it is
not in use. All idle handsets ring and display
**
Paging
**
.
To end paging:
f Press HOME/FLASH, CELL,
OFF/CANCEL
or /SPEAKER
on the handset
.
-OR-
f Press FIND HS again on the telephone base.
-OR-
f Place the handset in the telephone base or
charger.
Notes:
f If you press MUTE on a handset, the ringer of that handset is silenced but
the paging tone continues on the other handsets.
f If a handset is accessing the answering system, on a call (intercom call or
outside call), or out of range, that handset does not beep when paged.
f You cannot use the nd handset feature while the telephone base is playing messages or the answering system is
being accessed remotely.
To Next Page
Loading...
