AT&T DL72250 - Answering System; Answering System Settings; Announcement

102
Answering system settings
Use the answering system menu of a handset to set up the announcement
message,turnonorotheansweringsystemormessagealerttone,activate
call screening, or change the number of rings, remote access code or message
recording time.
Announcement
Your outgoing announcement plays when calls are answered
by the answering system.
The telephone has a default outgoing announcement, “Hello,
please leave a message aer the tone.” You can use this
announcement, or record your own.
To record a new outgoing announcement:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to scroll to Answering sys, then press
MENU/SELECT .
3. Press MENU/SELECT to select Announcement.
4. The screen displays Play [2] Del [3] Rec [7] and it
announces, “To play, press 2. To record, press 7.” Press 7 to
record. The handset announces, “Record aer the tone.
Press 5 when you are done.”
5. Aerthetone,speaktowardsthehandsetmicrophone.
Press 5 to end recording. The newly recorded
announcement automatically plays.
Tolistentotherecordedannouncementagain,waitaer
playback has completed, then press 2.
Answering system
Answering sys
ECO
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO
Recording... Stop
[5]
ECO