AT&T DL72310 - Message Window Displays

118
Answering system
Message window displays
The message window on the telephone base displays the total number of
messages. See the following table for other message window displays.
0 There are no messages in the answering system.
0
(ashing)
Aerapowerfailure,thenumberinthemessagewindowashesto
indicate that the date and time need to be set.
1-99 X Total number of messages and memos.
X Current message number during old message playback.
1-99
(ashing)
X Totalnumberofnewmessagesandmemos.Thenumberasheswhen
there are new messages that have not been reviewed.
X Current message number during new message playback.
X Aerapowerfailure,thenumberinthemessagewindowashesto
indicate that the date and time need to be set.
1-99 and F
(alternating)
Memory is full. Messages must be deleted before new messages can be
recorded.
-- X The answering system is being programmed by a system handset.
X The answering system is answering a call or recording a memo or
announcement.
X The answering system is being accessed remotely.
0-6 Telephone base ringer volume while adjusting.
1-8 Speaker volume level of the telephone base while adjusting.