AT&T DL72310 - Wall-Mount to Tabletop; Installation

14
Getting started
Installation options
Wall-mount to tabletop installation
4. See Telephone base installation on page 8.
3. Unplug the telephone line cord or the
DSLlterfromthetelephonewalljack.
Push the telephone base up and away
from the wall-mount bracket to detach it
from the wall-mount bracket.
To change the telephone base from the
wall-mount position to tabletop position,
follow the steps, as mentioned below.
1. Unplug the large end of the power
adapter from the electrical outlet.
2. If the telephone line cord and power
adapter cord are bundled, untie them
rst.Slidethewall-mountbracketupand
remove it from the wall-mounting plate.