AT&T DL72519 - Make, Answer or End a Cell Call

42
Telephone operation
Telephone operation
Make, answer or end a cell call
The DL72119/DL72219/DL72319/DL72419/DL72519 can be used to make or
answer calls on the cell line. You can connect a maximum of two Bluetooth
enabled cell phones to the telephone base.
To make a cell call:
1. Press /CELL on the handset. The handset displays Select a device.
f If you have only one cell phone connected to the telephone base, press
MENU/SELECT to select the only device.
f If you have two cell phones connected to the telephone, press CID or
DIR to select a cell phone and then press MENU/SELECT.
2. Enter the telephone number, then press /CELL to dial.
To predial a cell call:
1. Enter the telephone number.
2. Press /CELL on the handset to dial.
f If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls.
f If you have two cell phones connected to the telephone base, the handset
displays Select a device. Press CID or DIR to select a cell phone and
then press MENU/SELECT.
To answer a cell call:
f Press /CELL, /SPEAKER, or any dialing key (0-9, TONE or QUIET#).
To end a cell call:
f Press OFF/CANCEL, or put the handset in the telephone base or charger.
Notes:
f The handset displays Unable to call if your cell phone is in use.
f You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the
telephone base.
f The screen shows the elapsed time as you talk (in hours, minutes and seconds).
f When predialing (preview numbers before dialing), press MUTE/DELETE on the handset to backspace and delete;
press and hold REDIAL/PAUSE to insert a dialing pause (a P appears).
f Make a cell call using the cell lines of your telephone system instead of the remote voice control feature, if you need
to press dialing keys (0-9, TONE , QUIET
#
) during a call.