AT&T DL72519 - Handset Locator

51
Telephone operation
Handset locator
This feature helps you ndamisplacedhandset.
To start paging:
f Press /FIND HS on the telephone base when it is
not in use. All idle handsets ring and display
**
Paging
**
.
To end paging:
f Press HOME/FLASH, /CELL, OFF/CANCEL,
/SPEAKER or any dialing key (0-9, TONE or
QUIET#) on the handset .
-OR-
f Press FIND HS again on the telephone base.
-OR-
f Place the handset in the telephone base or charger.
Notes:
f If you press MUTE on a handset, the ringer of that handset is silenced but the paging tone continues on the other
handsets.
f If a handset is accessing the answering system, on a call (intercom call or outside call), or out of range, that handset
does not beep when paged.
f You cannot use the nd handset feature while the telephone base is playing messages or the answering system is
being accessed remotely.