AT&T DLP73450 - Make, Answer or End a Cell Call

54
Telephone operation
Telephone operation
Make, answer or end a cell call
The DLP73210/DLP73410/DLP73440/DLP73450/DLP73510/DLP73540 can
be used to make or answer calls on the cell line. You can connect a maximum of
two Bluetooth enabled cell phones to the telephone base.
To make a cell call:
1. Press CELL on the handset. The handset displays Select a device.
-OR-
Press /CELL on the telephone base. The screen displays SELECT A DEVICE.
f If you have only one cell phone connected to the telephone base, press
MENU/SELECT to select the only device.
f If you have two cell phones connected to the telephone, press CID or
DIR to select a cell phone and then press MENU/SELECT.
2. Enter the telephone number on the handset, then press CELL to dial.
-OR-
Enter the telephone number on the telephone base, then press /CELL or
MENU/SELECT to dial.
To predial a cell call:
1. Enter the telephone number.
2. Press CELL on the handset to dial.
-OR-
Press /CELL on the telephone base to dial.
f If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls.
f If you have two cell phones connected to the telephone base, the screen
displays Select a device. Press CID or DIR to select a cell phone and
then press MENU/SELECT.