8
Getting Started
Wall mounting
The telephone base can be installed on any standard wall-phone outlet as shown below.
Choose a location away from electronic equipment, such as personal computers,
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Plug power cord transformer
into electrical outlet.
Connect cords as shown, then press
and slide down firmly so base is held
securely on outlet mounting pegs.
Plug short telephone line
cord into telephone jack.
Clip wall-mount bracket
securely into notches on
underside of base.
Place handset in base to charge
for 12 hours before first use.
Rotate antenna
to fully upright
position.
To Next Page
Loading...
