45
Appendix
45
“Beep-Beep...Beep-Beep...”
(Double beep every 5 seconds)
Handset battery is low. Place handset in
charger to charge the battery.
“Beeeeeeeeep”
(1 long beep)
Confirmation tone (current operation has
been successfully completed).
“Beep-Beep-Beep-Beep-Beep”
(5 quick beeps)
Error tone (current operation has been
unsuccessful; try again).
Display screen messages, lights and tones
Alert tones
Indicator lights
ANSWER ON
On: Answering system is on.
Off: Answering system is off.
IN USE
Steady: Line is in use.
Flashing: Call is on hold.
(Also flashes in cadence
with ringing to announce
an incoming call.)
NEW CALL
If you have Caller ID service: On
when new calls have been received;
off when all new Caller ID records
at the telephone base have been
reviewed (see page 29).
SPEAKER
On when speakerphone
is activated.
CHARGE
On when handset is
charging in cradle.
“Siren”
(Alternating tones)
Handset is being paged.
“Beep”
(One beep every 10 seconds)
Message Alert at the telephone base
(there are new messages).
To Next Page
Loading...
