8
Getting Started
Wall mounting
The telephone base can be installed on any standard wall-phone outlet as shown below.
Choose a location away from electronic equipment such as personal computers, com-
puter routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or
moisture.
Press and slide down firmly
so base is held securely on
outlet mounting pegs.
Plug short telephone
cable into telephone
jack.
Connect short telephone cable and power
adapter as shown on page 6, then grasp and
squeeze to open hinged wall mount.
Rotate wall mount and
lock in place.
Remove handset cradle tab, rotate and replace to
hold corded handset securely in place when tele-
phone base is wall mounted.
To Next Page
Loading...
