AT&T EL51200 - Redial; To Review Numbers in the Redial List; To Call a Number from the Redial List

17
Telephone operation
Redial
Each handset stores the 20 numbers most recently called in the redial list.
To review numbers in the redial list
Press REDIAL/PAUSE in idle mode.
Press DIR or CID, or Press REDIAL/PAUSE repeatedly to
scroll through the 20 recently called numbers (up to 30
digits each). The handset beeps twice at the beginning or
end of the list.
Press OFF/CLEAR to exit the redial list.
NOTE: If you access an empty redial list, the handset sounds an error tone.
To call a number from the redial list
With the desired number from redial displaying, press
PHONE/FLASH or SPEAKER to dial (known as
Display Dial).
-OR-
Press PHONE/FLASH or SPEAKER and then wait for
the dial tone.
Press REDIAL/PAUSE. The screen shows the number most
recently called. If it is not the desired number, press DIR
or CID to scroll to the desired one.
Press MENU/SELECT. The handset dials the displayed
number.
NOTE: If you access an empty redial list, the handset sounds an
error tone.
1.
2.
3.
1.
1.
2.
3.
REDIAL
888-722-7702