EasyManua.ls Logo

AT&T EL52103 - Delete All Old Messages; Remote Access

AT&T EL52103
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Delete all old messages
You can delete all old messages in idle mode. Once deleted, you cannot retrieve them.
You cannot delete messages until you have listened to them.
On the telephone base: Press X/DELETE twice.
On a handset:
Press MENU/SELECT in idle mode.
Press CID or DIR to scroll to Answering sys, then press MENU/SELECT.
Press CID or DIR to scroll to Delete all old, then press MENU/SELECT twice.
Remote access
You can access the answering system remotely by dialing your home telephone number from
any touch-tone telephone. When the answering system answers, enter the 2-digit remote
access code (19, unless you have changed it; refer to Feature summary on page 8). New
messages are played automatically. Use the remote commands to control playback. There is
also a wallet card listing the remote commands at the back of the online user’s manual.
1.
2.
3.
Remote access commands
Actions Remote command
Play all messages.........................................................1
Play new messages ...................................................2
Delete the message (during playback) .......3
Delete all old messages ...................................... 33
Repeat or go back......................................................4
Stop .....................................................................................5
Actions Remote command
Help menu .................................................................. 5
Skip the message ..................................................... 6
Record announcement...................................... 7
Turn system on or o ............................................ 0
End remote access call (or hang up) ........... 8

Other manuals for AT&T EL52103

Related product manuals