25
Telephone operation
Options while on calls
Volume control
While on a call, press
DIR/VOLUME to increase or
CID/VOLUME to decrease the listening volume.
When the volume reaches the minimum or maximum
setting, you hear two beeps.
NOTE: The handset volume setting and speakerphone volume setting are independent.
Mute
Use the mute function to turn o the microphone while on a call. You can
hear the caller, but the caller cannot hear you.
To turn mute on:
Press MUTE/DELETE. When mute is on, the handset screen
shows Muted until the mute function is turned o.
To turn mute o:
Press MUTE/DELETE and then resume speaking. When
mute is o, Microphone on appears temporarily on the
handset screen.
-OR-
Mute is automatically turned o when you end the call.
Flash/call waiting
If you subscribe to call waiting service provided by your telephone service
provider, and someone calls while you are already on a call, you hear
two beeps.
Press
PHONE/FLASH to put your current call on hold
and take the new call.
Press
PHONE/FLASH anytime to switch back and
forth between calls.
NOTE: For more information on caller ID with call waiting, refer to About caller ID on
page 40.
•
•
•
•
Muted
888-722-7702
ECO
10:30
PM
11/20
To Next Page
Loading...
