AT&T EL52260 User Manual

11
Telephone settings
Handset settings
Ringer volume
You can set the handset ringer volume level (1-6), or turn the ringer off.
When the ringer is off, appears on the handset screen.
Press MENU/SELECT in idle mode to enter the main menu.
Press DIR or CID to scroll to >RINGERS. Press
MENU/SELECT.
Press MENU/SELECT to select >RINGER VOLUME.
Press DIR or CID to sample each volume level.
Press MENU/SELECT to save your preference.
NOTES:
Changing the handset ringer volume does not affect the base ringer volume. For more
information on the base ringer volume, see Telephone base ringer volume on page 15.
The handset ringer volume also determines the ringer volume of intercom calls (see Intercom
on page 24)
If the handset ringer volume is set to off, that handset ringer is silenced for all incoming calls;
however, that handset still plays the paging tone when you use the handset locator feature
(see Handset locator on page 23).
While the telephone is ringing, press OFF/CLEAR or MUTE/DELETE to silence the ringer
temporarily on that handset only (see Temporary ringer silencing on page 16).
Ringer tone
You can choose one of 10 ringer tones for the handset.
Follow Steps 1 and 2 in Ringer volume on this page.
Press DIR or CID to scroll to >RINGER TONE, then
press MENU/SELECT.
Press DIR or CID to sample each ringer tone.
Press MENU/SELECT to save your preference.
NOTE: If you turn off the handset ringer volume, you will not hear ringer tone samples.
LCD language
You can select the language used for all screen displays.
Press MENU/SELECT in idle mode to enter the main
menu.
Press DIR or CID to scroll to >SETTINGS.
Press MENU/SELECT twice to select >LCD LANGUAGE.
Press DIR or CID to select ENGLISH, FRANÇAIS
or ESPAÑOL.
Press MENU/SELECT to save your preference.
1.
2.
3.
4.
5.
•
•
•
•
1.
2.
3.
4.
1.
2.
3.
4.
5.
RINGER VOLUME
RINGER TONE
>1
LCD LANGUAGE
>ENGLISH

AT&T EL52260 Specifications

General

Brand	AT&T
Model	EL52260
Category	Cordless Telephone
Language	English