AT&T EL52303 - Clear Voicemail Indication; Key Tone

16
Telephone settings
Handset settings
Clear voicemail indication
Use this feature when the telephone indicates there is a new voicemail
message but there is none. This may occur, for example, when you have
accessed your voicemail while away from home. This feature only turns
o the displayed New voicemail message and icon; it does not delete
your voicemail messages. As long as you have new voicemail messages,
your telephone service provider continues to send the signal to turn on the
indicators.
To manually turn o the new voicemail indicators:
Press MENU/SELECT when in idle mode to enter the
main menu.
Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
Press CID or DIR to scroll to Clr voicemail,
then press MENU/SELECT. The screen shows
Reset VM Icon?.
Press MENU/SELECT to turn the voicemail indication o.
NOTE: For more information about using your voicemail service, contact your telephone
service provider for assistance.
Key tone
The handset is programmed to beep with each key press. You can turn the
key tone o, so there are no beeps when you press keys.
Press MENU/SELECT in idle mode to enter the
main menu.
Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
Press CID or DIR to scroll to Key tone, then press
MENU/SELECT.
Press CID or DIR to select On or O.
Press MENU/SELECT to save your preference.
1.
2.
3.
4.
1.
2.
3.
4.
5.
Clr voicemail
ECO
Key tone
ECO
Key tone:Off
ECO
Reset VM Icon?
ECO