AT&T EL52309 - AT&T DECT 6.0 - Create Directory Entries; To Create a New Directory Entry

Directory
27
Create directory entries
To create a new directory entry
1. Press MENU/
SELECT in idle mode to enter the main
menu.
2. Press TCID or DIRS to scroll to >DIRECTORY, then
press
MENU/SELECT.
3. Press TCID or DIRS to highlight >STORE.
4. Press
MENU/SELECT.
5. Enter the telephone number when prompted.
• Use the dial pad to enter up to 30 digits.
– Press TCID or DIRS to move the cursor to the
left or right.
– Press
MUTE/DELETE to erase digits.
– Press and hold
MUTE/DELETE to erase all digits.
– Press and hold
REDIAL/PAUSE to enter a three-
second dialing pause (a p appears).
-OR-
• Copy a number from redial by pressing
REDIAL/
PAUSE then press TCID or DIRS, or
pressing REDIAL/
PAUSE repeatedly to locate the number to copy. Press
MENU/SELECT to copy the number.
6. Press
MENU/SELECT to save the number in the display.
The display shows ALREADY SAVED if the number is already in the directory.
You cannot save the same number twice.
DBMM!MPH
?EJSFDUPSZ
TUPSF
?SFWJFX
999.994.3556`
FOUFS!OVNCFS
SFWJFX
?TUPSF